AMPLIFIER 120w RMS 5-ZONE 3MIC/2AUX INPUT [TI-120]
AMPLIFIER 120w RMS 5-ZONE 3MIC/2AUX INPUT [TI-120]
ITC

TI-120

TI-120
AMPLIFIER 120w RMS 5-ZONE 3MIC/2AUX INPUT
Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE

Overview

The basic public address 5 zone mixer amplifiers have power ratings from 60W, 120W, 240W, 350W, 500W to 650W. They are featured of 3 microphone inputs, 2 aux inputs and 1 EMC input. Priority muting is achieved via EMC for overriding other inputs except Mic1 on front panel. Individual gain controls are provided for Mic 1-3 and Aux 1-2, bass and treble controls and master volume control are provided for overall tone control. 70V, 100V and low impedance 4-16ohms speaker outputs are provided. Extensive protection from short-circuit, overload and high temp

Features

  • Mixer amplifier for paging and background music system
  • Rated power from 60W, 120W, 240W, 350W, 500W to 650W
  • 2U rack mount (less than 350W) and 3U rack mount design
  • 70V, 100V and low impedance 4-16ohm speaker output
  • 5 zone and all zone speaker terminals
  • Three Mic inputs by phone jack type
  • Mic 1 with VOX priority and VOX level on front panel
  • Mic 2-3 by phone jack on rear panel
  • Two Aux Inputs and 2 line inputs for spare use
  • One EMC priority input
  • EMC has priority over all inputs except MIC1
  • Mic 1-3, Aux 1-2 and master volume controls and bass/treble tone control
  • Short circuit, overload and high temp protection

Specifications

Model TI-120
Rated Power Output 120W
Speaker Outputs 70V, 100V & 4~16Ω
Input Sensitivity & Impedance MIC 1, 2, 3: 5mV/600Ω, Unbalanced phone jack input MIC 2, 3: 775mV/10KΩ, Unbalanced RCA input AUX 1, 2: 350mV/10KΩ, Unbalanced RCA input EMC: 775mV/10KΩ, Unbalanced RCA input
Output Sensitivity & Impedance MIX OUT: 1000mV/470Ω, Unbalanced RCA output
Tone Bass: ±10dB at 100Hz Treble: ±10dB at 10KHz
Frequency Response 50Hz~16KHz(+1dB, -3dB)
S/N Ratio MIC 1, 2, 3: 66dB, AUX 1, 2: 80dB
THD Less than 0.5% at 1KHz, 1/3 rated power
Muting Function MIC 1 overrides other input signals with 0-30dB attenuation
Crosstalk ≤50dB
Cooling Fan automatically start up when temp reaches 55℃
Protection High temp, overload & short-circuit
Power Supply ~110V/60Hz or~230V/50Hz or DC 24V
Power Consumption 200W
Weight 9.5Kg
Dimensions 484x335x88mm
Fin Panel: aluminum plate, black Case: steel plate, black